Criteria Specification Registry

Criteria Specification (CSpec) Registry is intended to provide access to the Criteria Specifications used and applied by ClinGen Variant Curation Expert Panels and biocurators in the classification of variants.

For general information about the ClinGen Expert Panels and Variant Curation please visit: Clinical Domain Working Groups. For specific inquiries regarding content correction or adding a new criteria specification refer to the Help page.

Should you encounter any issues regarding the data displayed, lack of functionality or other problems, please let us know by contacting us via email.

Criteria Specification

ClinGen Severe Combined Immunodeficiency Disease Expert Panel Specifications to the ACMG/AMP Variant Interpretation Guidelines for DCLRE1C Version 1.0.0

Version : 1.0.0 Release Notes :

Additional variants requested were added.

Severe Combined Immunodeficiency Disease VCEP

Released

10/9/2023

11:37:38

Rules for DCLRE1C

Gene: DCLRE1C (HGNC:17642) HGNC Name: DNA cross-link repair 1C Transcripts: NM_001033855.3 Disease: severe combined immunodeficiency due to DCLRE1C deficiency (MONDO:0011225) Mode of Inheritance: Autosomal recessive inheritance

Criteria & Strength Specifications
PVS1 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Null variant (nonsense, frameshift, canonical +/−1 or 2 splice sites, initiation codon, single or multi-exon deletion) in a gene where loss of function (LOF) is a known mechanism of disease. Caveats: • Beware of genes where LOF is not a known disease mechanism (e.g. GFAP, MYH7). • Use caution interpreting LOF variants at the extreme 3’ end of a gene. • Use caution with splice variants that are predicted to lead to exon skipping but leave the remainder of the protein intact. • Use caution in the presence of multiple transcripts. Stand Alone Very Strong Use ClinGen SVI recommendations for loss of function criterion (Tayoun et al., 2018 (PMID: 30192042)). Modification Type: General recommendation,Gene-specific Strong Use ClinGen SVI recommendations for loss of function criterion (Tayoun et al., 2018 (PMID: 30192042)) with one specification: For variants not predicted to undergo nonsense-mediated decay but removing >10% of protein (i.e. variants in the last exon, exon 14, or variants in the last 50 nucleotides of the penultimate exon after c.1106, codon 369, in exon 13), at least one pathogenic variant must be present downstream in order to apply PVS1_Strong. Note: Exons 1-3 and exons 1-4 have been reported as a hot spot for deletion variants as a result of homologous recombination of the wild-type DCLRE1C gene with a DCLRE1C pseudogene (PMID: 19953608). Modification Type: General recommendation,Gene-specific Moderate Use ClinGen SVI recommendations for loss of function criterion (Tayoun et al., 2018 (PMID: 30192042)) with one specification: For variants not predicted to undergo nonsense-mediated decay but removing >10% of protein (i.e. variants in the last exon, exon 14, or variants in the last 50 nucleotides of the penultimate exon after c.1106, codon 369, in exon 13), when at least one pathogenic variant is not present downstream downgrade to PVS1_Moderate. Note: Exons 1-3 and exons 1-4 have been reported as a hot spot for deletion variants as a result of homologous recombination of the wild-type DCLRE1C gene with a DCLRE1C pseudogene (PMID: 19953608). Modification Type: General recommendation Supporting Instructions: See attached PVS1 flowchart. Not Applicable
PS1 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Same amino acid change as a previously established pathogenic variant regardless of nucleotide change. Example: Val->Leu caused by either G>C or G>T in the same codon. Caveat: Beware of changes that impact splicing rather than at the amino acid/protein level. Stand Alone Very Strong Strong It can also be applied for splice variants at the same nucleotide and with similar impact prediction as previously reported pathogenic variant (if the predicted impact is equal to or greater than the known pathogenic variant per in silico splicing tool SpliceAI). - Example: c.105+1G>C is known to be pathogenic, can use PS1 for c.105+1G>T. Applicable if the previously established variant is classified as pathogenic by SCID VCEP specifications for DCLRE1C. Modification Type: Gene-specific Moderate It can also be applied for splice variants at the same nucleotide and with similar impact prediction as previously reported pathogenic variant (if the predicted impact is equal to or greater than the known pathogenic variant per in silico splicing tool SpliceAI). - Example: c.105+1G>C is known to be likely pathogenic, can use PS1 for c.105+1G>T Applicable if the previously established variant is classified as likely pathogenic by SCID VCEP specifications for DCLRE1C. Modification Type: Gene-specific,Strength Supporting Not Applicable
PS2 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary De novo (both maternity and paternity confirmed) in a patient with the disease and no family history. Note: Confirmation of paternity only is insufficient. Egg donation, surrogate motherhood, errors in embryo transfer, etc. can contribute to non-maternity. Stand Alone Very Strong Use ClinGen SVI recommendations for de novo criteria (see instructions below). Modification Type: General recommendation,Gene-specific Strong Use ClinGen SVI recommendations for de novo criteria (see instructions below). Modification Type: General recommendation,Gene-specific Moderate Use ClinGen SVI recommendations for de novo criteria (see instructions below). Modification Type: General recommendation,Gene-specific Supporting Use ClinGen SVI recommendations for de novo criteria (see instructions below). Modification Type: General recommendation,Gene-specific Instructions: The following guidelines should be used when determining the phenotypic consistency of each proband: “Phenotype highly specific for gene” proband must meet at least PP4_Moderate criteria; “Phenotype consistent with gene but not highly specific” proband must meet PP4 criteria; “Phenotype consistent with gene but not highly specific and high genetic heterogeneity”: proband has been asserted to have a SCID phenotype but does not meet PP4 criteria; Reduce points per proband by half if the phase is unconfirmed. Not Applicable
PS3 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Well-established in vitro or in vivo functional studies supportive of a damaging effect on the gene or gene product. Note: Functional studies that have been validated and shown to be reproducible and robust in a clinical diagnostic laboratory setting are considered the most well-established. Stand Alone Very Strong Strong PS3 may potentially be applied at the default strength level of Strong for evidence from an animal model expressing the variant of interest and recapitulating the DCLRE1C-SCID phenotype. Animal models will be reviewed on a case-by-case basis by the VCEP to determine the appropriate strength level. Modification Type: Gene-specific Moderate The strength of evidence from cellular models/in vitro studies is dependent upon abnormal results in in vitro DNA repair activity and V(D)J recombination assays: PS3_Moderate: Abnormal result in both an in vitro DNA repair activity assay AND an in vitro V(D)J recombination assay (defined as <25% of wild-type activity for both assays). At least one previously observed proband with the DCLRE1C variant meeting PP4 is required to apply PS3 at any strength on the basis of a cellular model/in vitro study. Approved assay instances: DNA repair activity assay Felgentreff et al., 2015 (PMID: 25917813) V(D)J recombination assay Pannicke et al., 2004 (PMID: 15071507) Ege et al., 2005 (PMID: 15731174) Felgentreff et al., 2015 (PMID: 25917813) Volk et al., 2015 (PMID: 26476407) Modification Type: Gene-specific Supporting The strength of evidence from cellular models/in vitro studies is dependent upon abnormal results in in vitro DNA repair activity and V(D)J recombination assays: PS3_Supporting: Abnormal result in an in vitro V(D)J recombination assay (same threshold, <25% of wild-type activity). At least one previously observed proband with the DCLRE1C variant meeting PP4 is required to apply PS3 at any strength on the basis of a cellular model/in vitro study. Approved assay instances: DNA repair activity assay Felgentreff et al., 2015 (PMID: 25917813) V(D)J recombination assay Pannicke et al., 2004 (PMID: 15071507) Ege et al., 2005 (PMID: 15731174) Felgentreff et al., 2015 (PMID: 25917813) Volk et al., 2015 (PMID: 26476407) Modification Type: Gene-specific,Strength Not Applicable
PS4 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary The prevalence of the variant in affected individuals is significantly increased compared to the prevalence in controls. Note 1: Relative risk (RR) or odds ratio (OR), as obtained from case-control studies, is >5.0 and the confidence interval around the estimate of RR or OR does not include 1.0. See manuscript for detailed guidance. Note 2: In instances of very rare variants where case-control studies may not reach statistical significance, the prior observation of the variant in multiple unrelated patients with the same phenotype, and its absence in controls, may be used as moderate level of evidence. Stand Alone Very Strong Strong Moderate Supporting Instructions: When the variant has been detected in multiple unrelated affected individuals (with at least one core feature of T lymphopenia, congenital alopecia, and nail dystrophy), evaluate each proband with the PP4 criteria (see below) and add points across all probands. Exclude the proband used to satisfy the PP4 criteria and cap each additional proband’s contribution at 2pt. Caveat: variant must be sufficiently rare (meet PM2 specification). Not Applicable
PM1 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Located in a mutational hot spot and/or critical and well-established functional domain (e.g. active site of an enzyme) without benign variation. Stand Alone Very Strong Strong Moderate Supporting Not Applicable Comments: Does not apply. No known missense variation hot spots in the DCLRE1C gene have been described. See PVS1 for the note about a known hotspot for DCLRE1C deletion variants. Note: Exons 1-3 and exons 1-4 have been reported as a hot spot for deletion variants as a result of homologous recombination of the wild-type DCLRE1C gene with a DCLRE1C pseudogene (PMID: 19953608).
PM2 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Absent from controls (or at extremely low frequency if recessive) in Exome Sequencing Project, 1000 Genomes or Exome Aggregation Consortium. Caveat: Population data for indels may be poorly called by next generation sequencing. Stand Alone Very Strong Strong Moderate Supporting gnomAD popmax filtering allele frequency <0.00003266 An additional requirement is that no homozygotes have been observed in gnomAD. Modification Type: Gene-specific Not Applicable
PM3 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary For recessive disorders, detected in trans with a pathogenic variant Note: This requires testing of parents (or offspring) to determine phase. Stand Alone Very Strong Use ClinGen SVI recommendations for in trans criterion with the additional requirement that the co-occurring variant must be classified using the SCID VCEP specifications for DCLRE1C. Modification Type: General recommendation Strong Use ClinGen SVI recommendations for in trans criterion with the additional requirement that the co-occurring variant must be classified using the SCID VCEP specifications for DCLRE1C. Modification Type: General recommendation Moderate Use ClinGen SVI recommendations for in trans criterion with the additional requirement that the co-occurring variant must be classified using the SCID VCEP specifications for DCLRE1C. Modification Type: General recommendation Supporting Use ClinGen SVI recommendations for in trans criterion with the additional requirement that the co-occurring variant must be classified using the SCID VCEP specifications for DCLRE1C. Modification Type: General recommendation Instructions: Caveat: All variants should be sufficiently rare (meet PM2 specification). The applicability of PM3 to suspected founder variants with allele frequencies exceeding the PM2 threshold will be evaluated on a case-by-case basis by the VCEP. Not Applicable
PM4 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Protein length changes due to in-frame deletions/insertions in a non-repeat region or stop-loss variants. Stand Alone Very Strong Strong Moderate When applied to deletion variants, the deleted region must contain a known pathogenic or likely pathogenic variant that is not predicted/observed to alter splicing. Modification Type: Gene-specific Supporting When applied to deletion variants, the deleted region must contain a known VUS variant that is not predicted/observed to alter splicing. Modification Type: Gene-specific,Strength Not Applicable
PM5 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Novel missense change at an amino acid residue where a different missense change determined to be pathogenic has been seen before. Example: Arg156His is pathogenic; now you observe Arg156Cys. Caveat: Beware of changes that impact splicing rather than at the amino acid/protein level. Stand Alone Very Strong Strong Moderate Applicable if a previously established variant is classified as pathogenic by SCID VCEP specifications for DCLRE1C. Previously established variant must be classified by SCID VCEP specifications for DCLRE1C. Modification Type: Gene-specific Supporting Applicable if a previously established variant is classified as likely pathogenic by SCID VCEP specifications for DCLRE1C. Previously established variant must be classified by SCID VCEP specifications for DCLRE1C. Modification Type: Gene-specific,Strength Not Applicable
PM6 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Assumed de novo, but without confirmation of paternity and maternity. Stand Alone Very Strong Strong Use ClinGen SVI recommendations for de novo criteria (see instructions below). Modification Type: General recommendation,Gene-specific Moderate Use ClinGen SVI recommendations for de novo criteria (see instructions below). Modification Type: General recommendation,Gene-specific Supporting Use ClinGen SVI recommendations for de novo criteria (see instructions below). Modification Type: General recommendation,Gene-specific Instructions: The following guidelines should be used when determining the phenotypic consistency of each proband: “Phenotype highly specific for gene” proband must meet at least PP4_Moderate criteria; “Phenotype consistent with gene but not highly specific” proband must meet PP4 criteria; “Phenotype consistent with gene but not highly specific and high genetic heterogeneity”: proband has been asserted to have a SCID phenotype but does not meet PP4 criteria; Reduce points per proband by half if the phase is unconfirmed. Not Applicable
PP1 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Co-segregation with disease in multiple affected family members in a gene definitively known to cause the disease. Note: May be used as stronger evidence with increasing segregation data. Stand Alone Very Strong Strong Use recommendations for co-segregation criterion from PMID: 30311386, with strength dependent on number of affected segregations. Modification Type: General recommendation Moderate Use recommendations for co-segregation criterion from PMID: 30311386, with strength dependent on number of affected segregations. Modification Type: General recommendation Supporting Use recommendations for co-segregation criterion from PMID: 30311386, with strength dependent on number of affected segregations. Modification Type: General recommendation Instructions: Use ClinGen SVI recommendations for co-segregation criterion (PMID: 30311386) with the additional specification that unaffected individuals contributing to the calculated LOD score (Attached document: PP1 specifications) must be heterozygous carriers of one of the variants observed in the affected individuals (i.e. do not count wild-type/wild-type, individuals). Not Applicable
PP2 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Missense variant in a gene that has a low rate of benign missense variation and where missense variants are a common mechanism of disease. Stand Alone Very Strong Strong Moderate Supporting Not Applicable Comments: Does not apply. The gnomAD v2.1.1 missense Z score for DCLRE1C (Z = -0.68) suggests this gene is not constrained for missense variation. Both benign and pathogenic missense variants are present in DCLRE1C.
PP3 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Multiple lines of computational evidence support a deleterious effect on the gene or gene product (conservation, evolutionary, splicing impact, etc.). Caveat: As many in silico algorithms use the same or very similar input for their predictions, each algorithm should not be counted as an independent criterion. PP3 can be used only once in any evaluation of a variant. Stand Alone Very Strong Strong Moderate Supporting Only applicable to synonymous or intronic variants predicted to impact splicing by SpliceAI with a delta score greater than or equal to 0.2. Do not apply to missense variants. Modification Type: General recommendation Not Applicable
PP4 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Patient’s phenotype or family history is highly specific for a disease with a single genetic etiology. Stand Alone Very Strong Strong A patient score of ≥ 7 points¹. ¹CNV (Copy number variation) testing is required to consider PP4_Strong in order to certify that the variant in question is the causative for the phenotype and not one CNV event corrected by gene therapy and not identified previously (see instructions below). Modification Type: Disease-specific,Gene-specific Moderate A patient score of 2-<7 points (see instructions below). Modification Type: Disease-specific,Gene-specific Supporting A patient score of 1-<2 points (see instructions below). Modification Type: Disease-specific,Gene-specific Instructions: PP4 applicability and strength is determined by the total points accumulated by a single affected individual according to the list below: Diagnostic criteria for SCID/Leaky SCID/Omenn syndrome met² (0.5pt) SCID gene panel or exome/genome sequencing conducted (only applicable if genetic testing did not provide an alternative genetic explanation for SCID/Leaky SCID/Omenn syndrome phenotype) (0.5pt) Family history of SCID (only applicable if SCID gene panel or exome/genome sequencing was conducted on proband and did not provide an alternative genetic explanation for phenotype) (0.5pt) Navajo or Apache descent (0.25pt) Increased cellular radiosensitivity (0.5pt) Decreased V(D)J recombination (0.5pt) Vector-based complementation corrected increased cellular radiosensitivity and/or decreased V(D)J recombination (2pt) SCID phenotype corrected by DCLRE1C gene therapy WITHOUT CNV testing performed (1pt) SCID phenotype corrected by DCLRE1C gene therapy WITH CNV testing performed (7pt) T-B-NK+ lymphocyte subset profile* (See notes) (0.5pt) ²The diagnostic criteria should follow the PIDTC 2022 specification, summarized here. *Notes: 1) If NK cells are not noted or are present, criteria may still be applied if SCID gene panel or exome/genome sequencing has ruled out alternative causes; 2) If maternal T cells are present, the T lymphocyte profile is still considered to be T- (autologous T cells are absent). Not Applicable
PP5
Original ACMG Summary Reputable source recently reports variant as pathogenic, but the evidence is not available to the laboratory to perform an independent evaluation. Not Applicable This criterion is not for use as recommended by the ClinGen Sequence Variant Interpretation VCEP Review Committee. PubMed : 29543229
BA1 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Allele frequency is above 5% in Exome Sequencing Project, 1000 Genomes or Exome Aggregation Consortium. Stand Alone gnomAD popmax filtering allele frequency >0.00346. Modification Type: Gene-specific Very Strong Strong Moderate Supporting Instructions: Maximum credible population allele frequency threshold determined using Whiffin/Ware calculator (https://www.cardiodb.org/allelefrequencyapp/) and the following parameters: Prevalence: 1:5,000 Allelic heterogeneity: 1 Genetic heterogeneity: 0.03 (based on the contribution of DCLRE1C variants to total SCID in the PIDTC 6901 cohort reported in Dvorak et al., 2019 (PMID: 30193840, Table 1): 3.2%, rounded to 3%) Penetrance: 50% Not Applicable
BS1 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Allele frequency is greater than expected for disorder. Stand Alone Very Strong Strong gnomAD popmax filtering allele frequency >0.00078¹ ¹ Consider also bottleneck populations. Modification Type: Gene-specific Moderate Supporting Instructions: Maximum credible population allele frequency threshold is determined using Whiffin/Ware calculator (https://www.cardiodb.org/allelefrequencyapp/) and the following parameters: Prevalence: 1:50,000 Allelic heterogeneity: 1 Genetic heterogeneity: 0.03 (based on the contribution of DCLRE1C variants to total SCID in the PIDTC 6901 cohort reported in Dvorak et al., 2019 (PMID: 30193840, Table 1): 3.2%, rounded to 3%) Penetrance: 100% Not Applicable
BS2 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Observed in a healthy adult individual for a recessive (homozygous), dominant (heterozygous), or X-linked (hemizygous) disorder, with full penetrance expected at an early age. Stand Alone Very Strong Strong Moderate Supporting Only to be used when the variant is observed in the homozygous state in a healthy adult. Modification Type: Disease-specific,Gene-specific Not Applicable Comments: Does not apply due to reduced penetrance.
BS3 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Well-established in vitro or in vivo functional studies show no damaging effect on protein function or splicing. Stand Alone Very Strong Strong Moderate Supporting Not Applicable Comments: There is not a well-established functional study which can rule out all damaging effects on protein function.
BS4 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Lack of segregation in affected members of a family. Caveat: The presence of phenocopies for common phenotypes (i.e. cancer, epilepsy) can mimic lack of segregation among affected individuals. Also, families may have more than one pathogenic variant contributing to an autosomal dominant disorder, further confounding an apparent lack of segregation. Stand Alone Very Strong Strong Can be applied without additional specifications. Modification Type: None Moderate Supporting Not Applicable
BP1 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Missense variant in a gene for which primarily truncating variants are known to cause disease. Stand Alone Very Strong Strong Moderate Supporting Not Applicable Comments: Does not apply. DCLRE1C missense variants are a known mechanism of disease.
BP2 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Observed in trans with a pathogenic variant for a fully penetrant dominant gene/disorder or observed in cis with a pathogenic variant in any inheritance pattern. Stand Alone Very Strong Strong Moderate Supporting Not Applicable
BP3 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary In frame-deletions/insertions in a repetitive region without a known function. Stand Alone Very Strong Strong Moderate Supporting Not Applicable Comments: Does not apply.
BP4 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Multiple lines of computational evidence suggest no impact on gene or gene product (conservation, evolutionary, splicing impact, etc) Caveat: As many in silico algorithms use the same or very similar input for their predictions, each algorithm cannot be counted as an independent criterion. BP4 can be used only once in any evaluation of a variant. Stand Alone Very Strong Strong Moderate Supporting Not Applicable
BP5 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary Variant found in a case with an alternate molecular basis for disease. Stand Alone Very Strong Strong Moderate Supporting Not Applicable
BP6
Original ACMG Summary Reputable source recently reports variant as benign, but the evidence is not available to the laboratory to perform an independent evaluation. Not Applicable This criterion is not for use as recommended by the ClinGen Sequence Variant Interpretation VCEP Review Committee. PubMed : 29543229
BP7 PVS1 PS1 PS2 PS3 PS4 PM1 PM2 PM3 PM4 PM5 PM6 PP1 PP2 PP3 PP4 PP5 BA1 BS1 BS2 BS3 BS4 BP1 BP2 BP3 BP4 BP5 BP6 BP7 Files References
Original ACMG Summary A synonymous variant for which splicing prediction algorithms predict no impact to the splice consensus sequence nor the creation of a new splice site AND the nucleotide is not highly conserved. Stand Alone Very Strong Strong Moderate Supporting Applicable to both synonymous variants and deep intronic variants affecting nucleotides at or beyond the +7 (donor) and -21 (acceptor) positions. The variant should be predicted not to impact splicing by at least two out of three in silico tools (freely available tools include GeneSplicer, MaxEntScan, NNSplice, SpliceAI, Splicing Sequences Finder (SSF), and varSEAK). Given the potential for poor conservation of genes related to T cell and B cell development among vertebrates, nucleotide conservation is not required in order to apply BP7. Modification Type: General recommendation Not Applicable

Rules for Combining Criteria

Pathogenic

1 Very Strong (PVS1, PS2_Very Strong, PM3_Very Strong) AND ≥ 1 Strong (PVS1_Strong, PS1, PS2, PS3, PM3_Strong, PM6_Strong, PP1_Strong, PP4_Strong)

1 Very Strong (PVS1, PS2_Very Strong, PM3_Very Strong) AND ≥ 2 Moderate (PVS1_Moderate, PS1_Moderate, PS2_Moderate, PS3_Moderate, PM3, PM4, PM5, PM6, PP1_Moderate, PP4_Moderate)

1 Very Strong (PVS1, PS2_Very Strong, PM3_Very Strong) AND 1 Moderate (PVS1_Moderate, PS1_Moderate, PS2_Moderate, PS3_Moderate, PM3, PM4, PM5, PM6, PP1_Moderate, PP4_Moderate) AND 1 Supporting (PS2_Supporting, PS3_Supporting, PM2_Supporting, PM3_Supporting, PM4_Supporting, PM5_Supporting, PM6_Supporting, PP1, PP3, PP4)

1 Very Strong (PVS1, PS2_Very Strong, PM3_Very Strong) AND ≥ 2 Supporting (PS2_Supporting, PS3_Supporting, PM2_Supporting, PM3_Supporting, PM4_Supporting, PM5_Supporting, PM6_Supporting, PP1, PP3, PP4)

≥ 2 Strong (PVS1_Strong, PS1, PS2, PS3, PM3_Strong, PM6_Strong, PP1_Strong, PP4_Strong)

1 Strong (PVS1_Strong, PS1, PS2, PS3, PM3_Strong, PM6_Strong, PP1_Strong, PP4_Strong) AND ≥ 3 Moderate (PVS1_Moderate, PS1_Moderate, PS2_Moderate, PS3_Moderate, PM3, PM4, PM5, PM6, PP1_Moderate, PP4_Moderate)

1 Strong (PVS1_Strong, PS1, PS2, PS3, PM3_Strong, PM6_Strong, PP1_Strong, PP4_Strong) AND 2 Moderate (PVS1_Moderate, PS1_Moderate, PS2_Moderate, PS3_Moderate, PM3, PM4, PM5, PM6, PP1_Moderate, PP4_Moderate) AND ≥ 2 Supporting (PS2_Supporting, PS3_Supporting, PM2_Supporting, PM3_Supporting, PM4_Supporting, PM5_Supporting, PM6_Supporting, PP1, PP3, PP4)

1 Strong (PVS1_Strong, PS1, PS2, PS3, PM3_Strong, PM6_Strong, PP1_Strong, PP4_Strong) AND 1 Moderate (PVS1_Moderate, PS1_Moderate, PS2_Moderate, PS3_Moderate, PM3, PM4, PM5, PM6, PP1_Moderate, PP4_Moderate) AND ≥ 4 Supporting (PS2_Supporting, PS3_Supporting, PM2_Supporting, PM3_Supporting, PM4_Supporting, PM5_Supporting, PM6_Supporting, PP1, PP3, PP4)

Likely Pathogenic

1 Very Strong (PVS1, PS2_Very Strong, PM3_Very Strong) AND 1 Moderate (PVS1_Moderate, PS1_Moderate, PS2_Moderate, PS3_Moderate, PM3, PM4, PM5, PM6, PP1_Moderate, PP4_Moderate)

1 Very Strong (PVS1, PS2_Very Strong, PM3_Very Strong) AND 1 Supporting (PS2_Supporting, PS3_Supporting, PM2_Supporting, PM3_Supporting, PM4_Supporting, PM5_Supporting, PM6_Supporting, PP1, PP3, PP4)

1 Strong (PVS1_Strong, PS1, PS2, PS3, PM3_Strong, PM6_Strong, PP1_Strong, PP4_Strong) AND ≥ 2 Supporting (PS2_Supporting, PS3_Supporting, PM2_Supporting, PM3_Supporting, PM4_Supporting, PM5_Supporting, PM6_Supporting, PP1, PP3, PP4)

≥ 3 Moderate (PVS1_Moderate, PS1_Moderate, PS2_Moderate, PS3_Moderate, PM3, PM4, PM5, PM6, PP1_Moderate, PP4_Moderate)

2 Moderate (PVS1_Moderate, PS1_Moderate, PS2_Moderate, PS3_Moderate, PM3, PM4, PM5, PM6, PP1_Moderate, PP4_Moderate) AND ≥ 2 Supporting (PS2_Supporting, PS3_Supporting, PM2_Supporting, PM3_Supporting, PM4_Supporting, PM5_Supporting, PM6_Supporting, PP1, PP3, PP4)

1 Moderate (PVS1_Moderate, PS1_Moderate, PS2_Moderate, PS3_Moderate, PM3, PM4, PM5, PM6, PP1_Moderate, PP4_Moderate) AND ≥ 4 Supporting (PS2_Supporting, PS3_Supporting, PM2_Supporting, PM3_Supporting, PM4_Supporting, PM5_Supporting, PM6_Supporting, PP1, PP3, PP4)

Benign

≥ 2 Strong (BS1, BS4)

1 Stand Alone (BA1)

Likely Benign

1 Strong (BS1, BS4)

2 Supporting (BS2_Supporting, BP7)

Files & Images

PS2_PM6: SVI recommendations for de novo criteria:

PP1: PP1 specifications:

Additional DCLRE1C variants:

PM3: SVI recommendations for pm3 criterion:

PVS1: Specified PVS1 flowchart for DCLRE1C gene:

SCID VCEP PS3_BS3 Functional Evidence (DCLRE1C):

DCLRE1C-PilotPhase-variants:

PP4 DCLRE1C: